2 comentarios en español del producto: Polymaker PolyLite ASA Negro
5 Valoraciones en otros idiomas
4,6 de 5 estrellas
5 estrellas | | 6 | (54%) |
---|---|---|---|
4 estrellas | | 5 | (45%) |
3 estrellas | | 0 | (0%) |
2 estrellas | | 0 | (0%) |
1 estrella | | 0 | (0%) |
Filtrar opiniones:
-
-
Comentario realizado por David
Valorado con 5 de 5 estrellas.
Muy buen material y envio rapido.
¿Te ha sido útil este comentario? (0) (0)
Artículos de nuestro blog:
Descubre 3DJake:
-
Envío gratuito a España
a partir de 87,90 € -
Devoluciones
gratuitas Más de 9.200 artículos
Pago seguro
con cifrado SSL
good filament but requires a learning period
Valorado con 4 de 5 estrellas.
I am satisfied with this filament. It has excellent thermal properties but requires an enclosure and has some peculiarities. For printing little parts it's easy but if you print objects more than 10cm y difficult because the warpping. I can printing without issues for anything sizes with:
nozzle: 250 ºC
bed: 94 ºC
Cardboard enclousure DIY - without this, for me it was impossible
Print 0,2 mm each layer at 0,5mm(125%) with 0,4mm nozzle. (E3D hemera)
Printed with Artillery X1
IS VERY IMPORTANT use a 3-5mm of Brim
and 10-11mm of skirt heigh (55 layers)
Without skirt and brim always appear the warpping or diferents problems.
I hope it will help you if you have a similar printer
¿Te ha sido útil este comentario? (3) (0)